Removal (Fig. 3)
Put vehicle on a level surface and engage parking
brake. Stop the engine and remove key from ignition
switch. Allow engine to cool.
3. Using Figure 3 as a guide, fit all exhaust components
to vehicle before tightening any fasteners. When secur-
ing exhaust, tighten fasteners in the following order:
1.
A. Hex nuts (item 3) that secure manifold to engine.
2.
bed is raised, place safety support on lift cylinder (see
Operator’s Manual).
Raise or remove the bed or other attachment(s). If
B. Cap screw (item 11) with washers (item 12) that
secures muffler to transaxle.
C. Socket head screws (item 1) and flange nuts
(item 10) that secure muffler to manifold.
3.
Remove exhaust system components as needed us-
ing Figure 3 as a guide.
D. Cap screws (item 17) and flange nuts (item 5) that
secure muffler to shift cable mount bracket.
4.
Discard gaskets and thoroughly clean flange sur-
faces of manifold and muffler.
E. Carriage screws (item 13) and flange nuts (item
5) that secure muffler to mount plate.
Installation (Fig. 3)
1.
Replace any removed gaskets.
F. Screw (item 6) and flange nut (item 5) that se-
cures exhaust manifold to bracket (item 8).
2.
If cap screw (item 11) was removed, apply Loctite
#242
(or equivalent) to threads during installation.
4. Lower or install bed or attachment(s).
Workman 3100
Kohler Gasoline Engine
Page 5 – 7
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Workman 3000, Toro Workman 4000 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)