Removal (Fig. 10)
Put vehicle on a level surface and engage parking
Installation (Fig. 10)
1.
1. Replace any removed gaskets.
brake. Stop the engine and remove key from ignition
switch. Allow engine to cool.
2.
#242
If cap screw (item 9) was removed, apply Loctite
(or equivalent) to threads during installation.
2.
bed is raised, place safety support on lift cylinder (see
Operator’s Manual).
Raise or remove the bed or other attachment(s). If
3.
Using Figure 10 as a guide, fit all exhaust compo-
nents to vehicle before tightening any fasteners. When
securing exhaust, tighten fasteners in the following or-
der:
3.
Remove exhaust system components as needed us-
ing Figure 10 as a guide.
A. Hex nuts (item 4) that secure exhaust manifold to
engine.
4.
Discard gaskets and thoroughly clean flange sur-
faces of manifold and muffler.
B. Cap screw (item 9) with washer (item 10) that se-
cures muffler to transaxle.
C. Socket head screws (item 6) and flange nuts
(item 8) that secure muffler to manifold.
D. Cap screws (item 7) and flange nuts (item 11) that
secure muffler to shift cable mount bracket.
E. Carriage bolts (item 12) and flange nuts (item 11)
that secure muffler to mount plate.
4.
Lower or install bed or attachment(s).
Workman 3300–D/4300–D
Briggs/Daihatsu Diesel Engine
Page 4 – 15
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Workman 3000, Toro Workman 4000 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |