Inspection
1.
13)
Inspect head (Item 6), piston (Item 5) and shaft (Item
for excessive scoring, pitting or wear. Replace any
worn or damaged parts.
Spanner wrench
2.
Inspect inside of barrel for scoring, pitting or out–of–
round and replace if worn or damaged.
Assembly (Fig. 34)
Retaining ring
1.
ring and wiper to piston and head. Apply clean Dexron
III ATF to all seal kit components before installing.
Use a new seal kit to replace all seals, o–rings, wear
(Offset end against left
side of barrel groove
after installing)
Figure 36
Installing retaining ring
2.
13).
Install head (Item 6) with new seals onto shaft (Item
Install piston (Item 5) with new seals and back–ups
onto shaft. Install piston onto shaft and secure with lock
nut (Item 1). Torque lock nut from 30 to 36 ft–lb (41 to 49
N–m).
3.
Coat all cylinder parts with clean Dexron III ATF. Slide
shaft assembly and head into barrel, being careful not to
damage seals.
4.
Install retaining ring (Item 9) to secure shaft assembly
in barrel. To install retaining ring, align key slot in head
with access groove in barrel. Rotate head clockwise as
far as the retaining ring will allow. Offset end of retaining
ring will be against left side of barrel groove as shown.
Workman 3000/4000 Series
Page 9 – 41
Hydraulic System
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Workman 3000, Toro Workman 4000 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |