Disassembly (Fig. 11)
Remove flange (19) from the pinion shaft (8) by re-
1.
moving lock nut (18) and washer (17) from the threaded
end of the shaft. Use a bearing puller if necessary to re-
move the coupler flange (Fig. 12).
2.
Secure carrier assembly (15) so that pinion gear
shaft (8) is facing up. Remove eight cap screws (16) se-
curing the front housing to the carrier assembly.
3.
(15)
Separate front housing (2) from the carrier assembly
using a cold chisel to initially separate the two parts.
Use a putty knife to further separate the housing and
carrier assembly (Fig. 13).
Figure 12
IMPORTANT: The bearing caps are marked for reas-
sembly. Place caps in a safe place to avoid damag-
ing their machined surface. Place caps back in the
same position during reassembly.
4.
Remove four cap screws (11) and both bearing caps
from the bearing cradles (Fig. 14).
IMPORTANT: Keep mating bearing bearing cups
(30)
with matching bearing cups (30) and bearing
caps.
Figure 13
5.
Remove differential gears from the carrier assembly
by using two wooden handles under the differential case
(27)
to pry up the case and gears (Fig. 15).
Figure 14
Figure 15
Workman 4000 Series
Page 10 – 17
Front Wheel Drive (4WD)
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Workman 3000, Toro Workman 4000 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |