Front Compression Spring Service
COMPRESSION SPRING TOOL
20I
TOP VIEW
5I
(4) 1/2Iflat washers
Control arm tower
Compression
1/2I steel rods
spring tool rod
(2)
8
Spring cradle
5I
(4)
1/2I nuts
Compression
spring
6
1
9
7
Install compression spring tool rods
with extended portion on opposite
ends so cap screws (Item 7)
securing spring cradles to control
arm tower can be removed.
Extended portion should be on nut
side of cap screw.
5
2
4
3
Figure 19
1.
2.
3.
Spring cradle
Spring
Lock nut
4.
5.
6.
Cap screw
Stabilizer link
Lock nut
7.
8.
9.
Cap screw
Control arm tower
Spring pivot sleeve
1.
sion assembly (see Seat Base removal in this section).
Remove seat base to gain access to front suspen-
6. Remove lock nut (Item 6) and cap screw (Item 7) se-
curing each spring cradle to control arm towers (Item 8),
then remove springs and cradles along with the stabiliz-
er links.
2.
(see Jacking Instructions in Operator’s Manual). Re-
move front wheels.
Jack up front of vehicle and secure with jack stands
7. Reverse this procedure to install springs.
3.
Remove front shock absorbers.
WARNING
FRONT SUSPENSION IS SPRING LOADED! To
prevent possible personal injury, use special
tool to remove compression springs before dis-
assembling the front suspension.
Install compression
spring tool before
disassembling
4.
Install a compression spring tool rod through holes
in each spring cradle (Item 1), then install nuts and
washers on both ends of each rod. Tighten one nut on
each rod to secure springs (Item 2). NOTE: Extended
portion of each compression spring tool must be on op-
posite ends so cap screws (Item 7) can be removed.
Figure 20
5.
Remove lock nut (Item 3) and cap screw (Item 4)
from lower end of each stabilizer link (Item 5).
Workman 3000/4000 Series
Page 7 – 27
Chassis
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Workman 3000, Toro Workman 4000 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |