Engine Installation (Fig. 4)
5. If shoulder bolt (Item 15) was removed, apply anti–
seize lubricant to bolt shoulder before installing.
1.
30)
Install flywheel (Item 33) and/or pilot bearing (Item
if removed. Torque socket head cap screw (Item 31)
6. Install a new engine oil filter. Fill engine with the cor-
rect oil (see Operator’s Manual).
from 35 to 41 ft–lb (47 to 56 N–m) to secure flywheel to
engine crankshaft.
7.
Install and adjust hydraulic pump drive belt (see Op-
2.
If pressure plate and clutch disc were removed, see
erator’s Manual).
Installing Clutch Disc and Cover in the Repairs section
of Chapter 6 Drive Train.
8.
Manual).
Adjust accelerator and choke cables (see Operator’s
3.
gine, apply antiseize lubricant on shaft surface before
installing pulley.
If hydraulic pump drive pulley was removed from en-
9.
Lower or install bed or attachment(s).
4.
To install the engine, perform Engine Removal steps
in reverse order. Scrape RTV sealant off engine / bell
housing surface. Apply new sealant in same area during
engine installation.
Kohler Gasoline Engine
Workman 3100
Page 5 – 10
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Workman 3000, Toro Workman 4000 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |