4.
Carefully slide wheel hub with inner bearing cone
8. Adjust brake shoes:
and seal onto spindle. Fill cavity of wheel hub 50% full
with grease.
A. Align access hole in brake drum with adjuster bolt
on adjuster assembly.
5.
Pack outer bearing cone with grease and insert it into
B. Rotate adjusting bolt to increase adjuster length
until brake shoes contact brake drum.
wheel hub over spindle. Install tab washer over bearing
and secure hub to spindle with jam nut. DO NOT tighten
jam nut.
C. Back off adjuster until drum rotates freely.
6.
While rotating wheel hub, tighten jam nut to a torque
9.
Install wheel. Secure with wheel nuts. Tighten lug
nuts in a crossing pattern to a torque from 45 to 65 ft–lb
to 88 N–m).
from 75 to 180 in–lb (8.5 to 20.3 N–m). Back off jam nut
until there is clearance between jam nut and tab washer.
While rotating wheel hub, retighten jam nut to a torque
from 10 to 15 in–lb (12 to 17 kg–cm). Position nut retain-
er to allow installation of cotter pin. Install cotter pin and
bend cotter pin completely around nut retainer. Install
dust cap.
(61
CAUTION
After reassembly, check the brakes in a wide
open, level area that is free of other persons and
obstructions.
7.
brake drum aligns with hole in front hub.
Install brake drum making sure that access hole in
10.Check
brake operation.
Workman 3000/4000 Series
Page 7 – 11
Chassis
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Workman 3000, Toro Workman 4000 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)