Toro 03126SL Rev C Service Manual Serial No 240000001 Above Workman 3000 4000

Removal
1.
Put vehicle on a level surface. Stop the engine  and
remove key from ignition switch. Remove the bed or oth-
er attachment(s). Allow engine and radiator to cool.
1
3
2.
Disconnect negative  (–) battery cable  from battery
first. Then disconnect positive (+) battery cable from bat-
tery.
2
3.
Remove drain plug from bottom of transaxle (Fig. 14)
and allow oil to drain into a drain pan. Install drain plug.
4.
Note orientation of  90o fitting connected to strainer
on side of transaxle. Remove hydraulic hose and 90o fit-
ting from strainer (Fig. 14).
Figure 14
3.
1.
2.
Drain plug
Strainer
90o fitting
5.
Remove  muffler  (see  Muffler Removal  in  Engine
Chapter).
6.
Remove hydraulic filter assembly and bracket.
7.
Disconnect and label  electrical leads that attach  to
transaxle and PTO.
Disconnect clutch  cable from  clutch release  lever,
1
8.
then loosen jam nut to remove clutch cable from support
bracket (Fig. 15).
2
3
9.
Loosen jam nut to remove differential lock cable from
support bracket, then disconnect differential lock cable
from lever at left rear of transaxle (Fig. 16).
10.Disconnect
shifter  control  cables  from  levers  on
Figure 15
transaxle and PTO. Do not loosen cable jam nuts at shift
cable mount bracket.
1.
2.
Clutch cable
Clutch release lever
3.
Support bracket
11.
Remove shift  cable mount  bracket from transaxle,
keeping shifter control cables attached to bracket. Posi-
tion bracket away from transaxle.
12.On
Workman 4000 series vehicles (4 Wheel Drive),
remove differential drive shaft, bidirectional clutch, and
adapter plate from the  transaxle (see Service and Re-
pairs section of Chapter 10 – Front Wheel Drive (4WD)).
1
13.Disconnect
return hydraulic hose from transaxle (or
PTO if equipped). Put label on hydraulic hose for proper
reassembly. Put caps or plugs on all open hoses or fit-
tings to prevent contamination.
2
14.Remove
PTO Removal and Installation).
PTO, if equipped, from top of transaxle (see
Figure 16
1.
Differential lock cable
2.   Differential lock lever
15.Block
front wheels.  Jack–up rear  of vehicle  under
rear axle and install jack stands so transaxle can be re-
moved by sliding out from under rear axle (see Jacking
Information in Operator’s Manual).
Workman 3000/4000 Series
Page 6 – 17
Drive Train
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 302 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website