Toro 09172SL Models 30857 30858 Groundsmaster 4500 D 4700 D Service Manual

Removal (Fig. 69)
Park  machine  on  a  level  surface,  lower  cutting
decks, stop engine, engage parking brake and remove
key from the ignition switch.
Installation (Fig. 69)
1.
1.  If fittings  were removed from axle  motor, lubricate
and place new O--rings onto fittings. Install fittings into
motor ports using marks made during the removal pro-
cess to properly orientate fittings. Tighten  fittings (see
Hydraulic Fitting Installation in the General Information
section of this chapter).
2.
Installing Hydraulic System Components at the begin-
ning of the Service and Repairs section of this chapter.
Read the  General Precautions  for Removing  and
2.
If removed, install pinion gear to axle motor.
3.
To prevent contamination of hydraulic system during
axle motor removal, thoroughly clean exterior of motor.
3.  Install O--ring onto motor. Position motor to rear axle
assembly making sure that arrows on the side of motor
case point upward. Align gear teeth and slide motor into
place.
4.
Disconnect hydraulic lines from motor. Put  caps or
plugs on lines and fittings to prevent contamination. La-
bel the hydraulic hoses to show their correct position on
the axle motor for assembly purposes.
4.  Secure motor to axle with cap screws and flat wash-
ers.
IMPORTANT: Support axle motor to prevent motor
from falling during removal.
5.  Remove plugs from lines and fittings. Attach hydrau-
lic lines to  axle motor (see  Hydraulic Hose and  Tube
Installation in  the General  Information section  of this
chapter).
5.
Remove motor using Figure 69 as a guide.
6.
If hydraulic fittings are to be removed from axle mo-
tor, mark  fitting orientation to  allow correct assembly.
Remove fittings from motor and discard O--rings.
6.
quired.
Fill  hydraulic reservoir  with  hydraulic fluid  as  re-
7.
hoses and fittings do not contact anything.
After assembly  is completed,  verify that  hydraulic
Groundsmaster 4500--D/4700--D
Page 4 -- 87
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 298 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website