Hydraulic Solenoid Valve Coil
A hydraulic solenoid valve coil on a hydraulic control
manifold can be replaced without opening the hydraulic
system.
4
3
Removal (Fig. 49)
1.
decks, stop engine and engage parking brake. Remove
key from ignition switch.
Park machine on a level surface, lower cutting
5
ft--lb
(6.7
N--m)
2.
Locate the solenoid valve coil that is to be removed.
2
3.
Disconnect the wire harness electrical connector
from the coil that is to be removed. Note orientation of
electrical connector on coil for assembly purposes.
4.
5.
6.
Remove the nut from the hydraulic valve.
Slide the solenoid coil from the valve.
Clean any corrosion or dirt from valve stem.
1
Installation (Fig. 49)
Slide solenoid coil onto the hydraulic valve. Position
GM 4500 LIFT CONTROL
MANIFOLD SHOWN
1.
coil so that connector is properly orientated.
Figure 49
2.
(6.7
Install the nut onto the valve and torque nut 5 ft--lb
N--m) (do not over tighten).
1.
2.
Control manifold
Solenoid valve
3.
4.
Coil
Nut
3.
Connect the machine wire harness connector to the
solenoid coil.
Groundsmaster 4500--D/4700--D
Page 5 -- 37
Electrical System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 30857, Toro Groundsmaster 30858, Toro Groundsmaster 4500 D, Toro Groundsmaster 4700 D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)