Toro 09172SL Models 30857 30858 Groundsmaster 4500 D 4700 D Service Manual

Removal (Fig. 113)
2.  Install oil cooler using Figures 113, 114 and 115 as
guides (see Hydraulic Hose and Tube Installation in the
General Information section of this chapter).
CAUTION
3.
Fill reservoir with hydraulic fluid as required.
The radiator and oil cooler may be hot. To avoid
possible  burns, allow  the  engine and  cooling
systems to cool before working on the oil cooler.
1
1
1.
Park  machine  on  a  level  surface,  lower  cutting
decks, stop engine, engage parking brake and remove
key from the ignition switch.
2.
Installing Hydraulic System Components at the begin-
ning of the Service and Repairs section of this chapter.
Read the  General Precautions  for Removing  and
3.
oil cooler removal, thoroughly clean exterior of cooler.
To prevent contamination of hydraulic system during
3
2
4.
guides.
Remove oilcooler usingFigures 113,114and  115as
Figure 114
1.
2.
Oil cooler latch
Hose to oil cooler
3.
Hose from oil cooler
5.
If hydraulic fittings are to be removed from oil cooler,
mark fitting orientation  to allow correct assembly. Re-
move fittings from cooler and discard O--rings.
1
2
Inspection
1.
Backflushoilcoolerwithcleaningsolvent.Aftercool-
er is clean,  make sure all solvent  is drained from  the
cooler.
CAUTION
Use eye protection such as goggles when using
compressed air.
Figure 115
2.
2.
opposite direction of the oil flow.
Dry inside of oil cooler using compressed air in the
1.
Oil cooler latch
Oil cooler
3.
Make sure fins are clear of dirt and debris.
Plug both ends of oil cooler. Clean exterior of cooler.
4.
The oil cooler should be free  of corrosion, cracked
tubes and excessive pitting of tubes.
Installation (Fig. 113)
1.
If fittings were removed from oil cooler, lubricate and
placenewO--ringsontofittings.Installfittingsintocooler
openingsusingmarksmadeduringtheremovalprocess
to properly  orientate fittings. Tighten  fittings (see Hy-
draulic  Fitting Installation  in the  General Information
section of this chapter).
Groundsmaster 4500--D/4700--D
Page 4 -- 137
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 298 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website