Removal (Fig. 3)
Park machine on a level surface, lower cutting
1.
decks, stop engine, engage parking brake and remove
key from the ignition switch.
2.
ers that secure hydraulic motor to the cutting deck (Fig.
Remove two (2) socket head screws and flat wash-
1
4).
3.
Remove hydraulic motor and O--ring from deck.
Cover top of spindle to prevent debris from entering
1
spindle. A spindle plug (see Special Tools in this chap-
ter) can be used to cover spindle.
2
4.
Start the engine and raise the cutting deck. Stop en-
gine and remove key from the ignition switch. Support
the cutting deck so it cannot fall accidentally. If required
for easier service, remove cutting deck.
Figure 4
1.
Socket head screw
2.
Hydraulic motor
5.
Remove blade bolt, anti--scalp cup and cutting
blade.
6.
Remove cap screws and flange nuts securing
spindle assembly to cutting deck. Slide spindle assem-
bly out the bottom of the deck. Remove spindle plate
from top of deck.
Installation (Fig. 3)
1.
ting deck. Notches on cutting deck and spindle plate
should be aligned to front of deck.
Position spindle assembly and spindle plate to cut-
2.
deck with cap screws and flange nuts. Tighten flange
nuts in a star pattern.
Securespindle assemblyandspindleplatetocutting
3.
blade bolt from 88 to 108 ft--lb (120 to 146 N--m).
Install cutting blade, anti--scalp cup and bolt. Tighten
4.
Remove cover from top of spindle that was placed to
prevent debris from entering spindle.
5.
draulicmotortothecuttingdeckwithtwo(2)sockethead
screws and flat washers.
Position O--ringtotopofspindle housing. Secure hy-
6.
verify that hydraulic hoses and fittings do not contact
anything.
After assembly, raise and lower the cutting deck to
Groundsmaster 4500--D/4700--D
Page 8 -- 9
Cutting Decks
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 30857, Toro Groundsmaster 30858, Toro Groundsmaster 4500 D, Toro Groundsmaster 4700 D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)