Toro 09172SL Models 30857 30858 Groundsmaster 4500 D 4700 D Service Manual

Removal (Fig. 70)
Park  machine  on  a  level  surface,  lower  cutting
decks, stop engine, engage parking brake and remove
key from the ignition switch.
Installation (Fig. 70)
1.
1.  If fittings were removed from wheel motor, lubricate
and place new O--rings onto fittings. Install fittings into
motor ports using marks made during the removal pro-
cess to properly orientate fittings. Tighten  fittings (see
Hydraulic Fitting Installation in the General Information
section of this chapter).
2.
3.
Raise front of machine and support with jackstands.
Read the  General Precautions  for Removing  and
Installing Hydraulic System Components at the begin-
ning of the Service and Repairs section of this chapter.
2.
that arrows on the side of motor case point upward.
Positionwheelmotortobrakeassemblymakingsure
4.
wheel motor removal, thoroughly clean exterior of mo-
tor.
To prevent contamination of hydraulic system during
3.
Slide motor into brake assembly.
Align splines on motor shaft and splined brake shaft.
4.
Secure motor  to brake assembly  with cap screws
andflatwashers.Tightencapscrews   from75to85ft--lb
to 115 N--m).
5.
Disconnect hydraulic hoses  and tubes from wheel
motor.Putcaps  or plugs on hoses and fittings to prevent
contamination. Label the  hydraulic lines to show their
correct position on the wheel  motor for assembly pur-
poses.
(102
5.  Remove plugs from lines and fittings. Attach hydrau-
lic lines and tubes to wheel motor (see Hydraulic Hose
and Tube Installation in the General Information section
of this chapter).
IMPORTANT: Support wheel motor  to prevent mo-
tor from falling during removal.
6.
7.
Lower machine to ground.
6.
7.
Remove wheel motor using Figure 70 as a guide.
Ifhydraulicfittingsaretoberemovedfromwheelmo-
Fill reservoir with hydraulic fluid as required.
tor, mark  fitting orientation to  allow correct assembly.
Remove fittings from motor and discard O--rings.
Groundsmaster 4500--D/4700--D
Page 4 -- 89
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 298 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website