Removal (Fig. 8)
Park machine on a level surface, lower cutting
decks, stop engine, engage parking brake and remove
key from the ignition switch.
2. Carefully position radiator and recirculation barriers
(items 24 and 25) to the radiator mount. Secure radiator
and barriers in place with four (4) flange head screws
and flange nuts.
1.
3.
Position lower radiator shroud andfan motor bracket
2.
in the Service and Repairs section of Chapter 7 -- Chas-
sis).
Removehoodfromthemachine(seeHoodRemoval
assembly to the radiator. Make sure that hydraulic
hoses are correctly positioned in grommets in lower ra-
diator shroud.
4.
screws and flange nuts (Fig. 9).
Secure fan motor bracket to radiator with six (6) cap
CAUTION
5.
moved fasteners.
Secure lower radiator shroud to radiator with re-
Do not open radiator cap or drain coolant if the
radiator or engine is hot. Pressurized, hot cool-
ant can escape and cause burns.
6. Position upper radiator shroud to lower radiator
shroud and radiator. Secure shrouds with removed fas-
teners. Make sure that clearance between shrouds and
fan is at least 0.180” (4.6 mm) at all points.
Ethylene--glycol antifreeze is poisonous. Dis-
pose of coolant properly or store it in a properly
labeled container away from children and pets.
7.
Connect reservoir hose (item 39) to the radiator vent
tube.
3.
Remove radiator cap. Drain radiator into a suitable
container using the radiator draincock.
8.
9.
Connect upper and lower hoses to the radiator.
Install plenum (item 7) to radiator mount and secure
4.
5.
6.
that secure plenum (item 7) to radiator mount. Remove
plenum.
Disconnect upper and lower hoses from the radiator.
Remove air cleaner hose (item 6).
with flange head screws and flange nuts.
10.Install
plenum.
air cleaner hose (item 6) to the air cleaner and
Fill radiator with coolant.
hood on the machine (see Hood Installation in
Remove four (4) flange head screws and flange nuts
11.
7.
Disconnectreservoirhose(item39)fromtheradiator
12.Install
the Service and Repairs section of Chapter 7 -- Chas-
sis).
vent tube.
8.
Detach upper radiator shroud from the radiator and
lower radiator shroud. Remove upper shroud from ma-
chine.
9.
to radiator.
Remove fasteners that secure lower radiator shroud
6
10.Remove
cure fan motor bracket to radiator (Fig. 9).
six (6) cap screws and flange nuts that se-
3
4
11.
assembly away from radiator.
Position lower radiator shroud andfan motor bracket
1
5
12.Remove
four (4) flange head screws and flange nuts
securingtheradiatorandrecirculationbarriers(items24
and 25) to the radiator mount. Carefully remove barriers
and radiator from the machine.
2
13.Plug
all radiator and hose openings to prevent con-
tamination.
Installation (Fig. 8)
Figure 9
1.
2.
3.
Fan
Fan motor bracket
Fan motor
4.
5.
6.
Cap screw (6 used)
Flange nut (6 used)
Radiator
1.
during the removal procedure. Make sure that radiator
draincock is closed.
Remove plugs placed in radiator and hose openings
Groundsmaster 4500--D/4700--D
Page 3 -- 11
Kubota Diesel Engine
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 30857, Toro Groundsmaster 30858, Toro Groundsmaster 4500 D, Toro Groundsmaster 4700 D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)