Removal (Fig. 14)
Park machine on a level surface, lower cutting
decks, stop engine, apply parking brake and remove
key from the ignition switch.
C. Place flat washer (item 11), seat belt buckle (item
and spacer (item 26) between seat and console
arm support (item 23). Secure with cap screw (item
27).
14)
1.
D. Fully tighten all fasteners to secure console arm
assembly to seat.
2.
wire harness.
Disconnect seat electrical connector from machine
4.
harness.
Connect seat electrical connector to machine wire
3.
shifting.
Support console arm assembly to prevent it from
4.
(item 28) that secure support bracket (item 24) to sup-
port channel (item 22).
Remove flange nut (item 29) and carriage screw
5.
31)
Remove cap screw (item 30) and lock washer (item
that secure console arm support (item 23) to cou-
1
pling nut (item 32).
6.
spacer(item26)andseatbeltbuckle (item14)fromseat
and console arm support (item 23).
Remove cap screw (item 27), flat washer (item 11),
IMPORTANT: Make sure to not damage the electri-
cal harness, control cable or other parts while mov-
ing the console arm assembly.
3
4
7.
Carefully move console arm assembly away from
seat.
2
8.
to seat suspension (Fig. 15). Note that the screw near
theseatadjustmenthandleislongerthantheotherthree
Remove four (4) torx head screws that secure seat
18 ft--lb
(25 N--m)
(3)
screws.
Figure 15
9.
chine.
Lift seat from seat suspension and remove from ma-
1.
2.
Seat
Suspension assembly
3.
4.
Screw (M8x12) (3 used)
Screw (M8x16)
Installation (Fig. 14)
1.
Carefully position seat to seat suspension.
2.
Secure seat to seat suspension with four (4) torx
head screws (Fig. 15). Make sure that longer screw is
positioned near the seat adjustment handle. Torque
screws 18 ft--lb (25 N--m).
IMPORTANT: Make sure to not damage the electri-
cal harness, control cable or other parts while mov-
ing the console arm assembly.
3.
Install all fasteners before fully tightening them.
Position and secure console arm assembly to seat.
A. Secure support bracket (item 24) and support
channel (item 22) with flange nut (item 29) and car-
riage screw (item 28).
B. Secure console armsupport(item23)tocoupling
nut with cap screw (item 30) and lock washer (item
31).
Groundsmaster 4500--D/4700--D
Page 7 -- 15
Chassis
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 30857, Toro Groundsmaster 30858, Toro Groundsmaster 4500 D, Toro Groundsmaster 4700 D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)