Change Hydraulic Fluid
Change hydraulic fluid after every 400 operating hours,
under normal conditions. If fluid becomes contami-
nated, the system must be flushed. Contaminated fluid
looks milky or black when compared to clean oil.
1
1.
Turn engine off and raise hood.
2
2.
Disconnect hydraulic hose from filter head or remove
hydraulic filter and let hydraulic fluid flow into drain pan.
When hydraulic fluid stops draining, connect the hy-
draulic hose or install new hydraulic filter.
3.
Fill hydraulic tank with approximately 3.5 gallons
(13.2
Fluid.
liters) of hydraulic fluid. Refer to Check Hydraulic
Figure 35
1.
Hydraulic hose
2.
Filter head
IMPORTANT: Use only recommended hydraulic
fluids to fill hydraulic tank. Other fluids could cause
system damage.
4.
Install hydraulic tank cap. Start engine and use all hy-
draulic controls to distribute hydraulic fluid throughout
the system. Also check for leaks. Then stop the engine.
1
5.
Check level of fluid and add enough to raise level to
FULL mark on dipstick. DO NOT OVER FILL.
2
Figure 36
1.
Hydraulic oil filter
2.
Rear wheel
2
1
Figure 37
1.
Hydraulic tank
2.
Cap
Reelmaster 3100−D
Hydraulic System (Rev. C)
Page 4 − 59
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Reelmaster 3100-D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)