Toro 99024SL Rev E Reelmaster 3100 D Preface Publication Service Manual

Backlapping
DANGER
2
TO AVOID PERSONAL INJURY OR DEATH:
Never place hands or feet in reel area while the
engine is running.
While backlapping, reels may stall and then re-
1
--
--
start.
--
--
Do not attempt to restart reels by hand or foot.
Do not adjust reels while the engine is running.
If the reel stalls, stop engine before attempting to
clear the reel.
--
Reel motors are connected  in series, moving
one motor moves the other two.
Figure 17
1.
Backlap knob
2.
Reel speed knob
Note:
backlapping are available in the Toro General  Service
Training Book, Reel Mower Basics (part no. 09168SL).
Additional   instructions  and   procedures   on
7.
To make  an adjustment  to the  cutting units  while
backlapping, turn off the  reels by pushing in the reels
ON/OFFswitchoninstrumentpaneltoOFFpositionand
stopping the engine. After adjustments have been com-
pleted, repeat steps 4 through 6.
1.
cutting units, stop engine,  engage parking brake, and
remove key from the ignition switch.
Position machine on  a clean, level surface.  Lower
8.
When backlap operation is completed, rotate back-
lap knob counter--clockwise  to the MOW position, set
reel speed controls to the desired mowing setting, and
wash all lapping compound off the cutting units.
2.
3.
Remove console cover to expose the controls.
Rotatebacklapknobonthemanifoldblockclockwise
to the  BACKLAP position. Rotate  reel speed knob to
position 1.
Note:
For a better cutting edge, run a file across the
front face of the bedknife when the lapping operation is
completed. This will remove any burrs or rough edges
that may have built up on the cutting edge.
4.
Make initial reel to bedknife adjustments appropriate
for backlapping on all cutting units. Start engine and set
engine speed to low idle.
5.
MOW and depressing the reel ON/OFF switch.
Engage  reels  by  moving mow/transport  lever  to
CAUTION
Becarefulwhenlappingthereelbecausecontact
with the reel or other moving parts can result in
personal injury.
6.
Apply lapping compound with a long handled brush.
Cutting Units
Page 7 -- 14   Rev. E
Reelmaster 3100--D
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 264 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website