Check Air Filter, Dust Cup, & Burp Valve
1
The air cleaner body, air filter, dust cup, and burp valve
should be check daily prior to operation.
1.
Park machine on a level surface, lower cutting units,
stop engine, engage parking brake, and remove key
from the ignition switch.
2
2.
Check air cleaner body for damage that could cause
possible air leaks. Make sure dust cup seals completely
to the air cleaner body.
3
3.
Check burp valve and dust cup for damage.
Figure 18
4.
engine and radiator are secured tightly and free of pos-
sible air leaks.
Make sure air hoses connecting the air cleaner to the
1.
2.
Latch
Dust cup
3.
Burp valve
Service Air Filter, Dust Cup, & Burp Valve
2
1
The air cleaner filter should be serviced ever 50 hours,
and more frequently in extreme dusty conditions.
1.
Park machine on a level surface, lower cutting units,
stop engine, engage parking brake, and remove key
from the ignition switch.
2.
Release latches securing air cleaner cover to air
cleaner body. Separate cover from body. Clean inside of
air cleaner cover.
3.
amount of dust dislodged. Avoid knocking filter against
air cleaner body.
Gently slide filter out of air cleaner body to reduce the
Figure 19
1.
Filter element
2.
Body
Compressed Air Method
4.
Inspect filter and discard if damaged. Do not wash or
reuse a damaged filter.
A. Blow compressed air from inside to the outside of
dry filter element. Do not exceed 100 psi to prevent
damage to the element.
IMPORTANT: Do not over service the air filter ele-
ment; damage may result.
B. Keep air hose nozzle at least 2 inches (5 cm) from
the filter. Move nozzle up and down while rotating the
filter element. Inspect for holes and tears by looking
through the filter toward a bright light.
Washing Method
A. Prepare a solution of filter cleaner and water.
Soak filter element about 15 minutes. Refer to direc-
tions on filter cleaner carton for complete informa-
tion.
5.
Inspect new filter for shipping damage. Check seal-
ing end of filter. Do not install a damaged filter.
B. After soaking filter for 15 minutes, rinse it with
clear water. Maximum water pressure must not ex-
ceed 40 psi to prevent damage to the filter element.
Rinse filter from clean side to dirty side.
6.
Insert new filter properly into air cleaner body. Make
sure filter is sealed properly by applying pressure to out-
er rim of filter when installing. Do not press on flexible
center of filter.
C. Dry filter element using warm, flowing air (160oF
7.
is positioned with TOP side up.
Reinstall cover and secure latches. Make sure cover
maximum), or allow element to air−dry. Do not use a
light bulb to dry the filter element because damage
could result.
Kubota Diesel Engine
Reelmaster 3100−D
Page 3 − 12
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Reelmaster 3100-D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)