C. Disconnect traction control cable from the pump
lever.
6
9
D. Remove both flange head screws securing the
neutral bracket to the piston pump. Remove flange
nut and flange head screw securing the neutral
bracket to the pump mount plate.
2
8
14
11
13 12
5
E. Remove cap screw and flat washer securing the
pump lever to the piston pump trunnion.
10
7
7
F. Separate pump lever from pump trunnion and
neutral bracket from mount plate.
1
4.
Hydraulic Fluid in this section).
Drain hydraulic oil from hydraulic tank (see Change
4
3
WARNING
LATER MODELS
Extension spring
Cable support bracket
Pump lever
Traction control cable
Neutral bracket
Before disconnecting or performing any work
on the hydraulic system, all pressure in the
system must be relieved. See Relieving Hy-
draulic System Pressure in the General Infor-
mation section.
Figure 64
8.
9.
10. Flange head screw
11. Flange nut
12. Flat washer
13. Cap screw
14. Pump lever hub
1.
Flange nut
Piston pump
2.
3.
4.
5.
6.
7.
Pump mount plate
Flange head screw
5.
Disconnect all hydraulic hoses connected to the hy-
draulic fittings on the piston and gear pumps. Allow
hoses to drain into a suitable container.
CAUTION
Support piston and gear pumps when removing
them from the pump support and pump mount
plate to prevent them from falling and causing
personal injury.
6.
Remove both cap screws, washers, and spacers se-
curing the piston pump to the pump support.
7.
Remove both lock nuts, cap screws, and washers
securing the piston pump to the pump mount plate. Pull
pumps from the machine.
2
1
8.
Remove both socket head screws and flat washers
Figure 65
securing gear pump to the piston pump. Separate gear
pump and O−ring from the piston pump. Plug openings
of gear pump to prevent contamination.
1.
Gear pump
2. Suction port
9.
Remove hydraulic fittings and O−rings from the pis-
ton pump.
10.Remove
shaft.
taper lock bushing from the piston pump
11.
If hydraulic fittings are to be removed from pump,
mark fitting orientation to allow correct assembly.
Hydraulic System (Rev. C)
Reelmaster 3100−D
Page 4 − 98
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Reelmaster 3100-D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)