24.If
a cutting unit strikes a solid object or vibrates ab-
C. Disengage the cutting units and wait for the reels
to stop spinning.
normally, stop immediately. Turn engine off, wait for all
motion to stop and inspect for damage. A damaged reel
or bedknife must be repaired or replaced before opera-
tion is continued.
D. Stop the engine and remove key from the ignition
switch.
26.Whenever
machine is left unattended, make sure
25.Before
getting off the seat:
reels are not spinning, key is removed from ignition
switch and parking brake is set.
A. Move traction pedal to neutral.
B. Set the parking brake.
Maintenance and Service
27.Before
chine, stop the engine and remove key from switch to
prevent accidental starting of the engine.
servicing or making adjustments to the ma-
33.If major repairs are ever needed or if assistance is
desired, contact an Authorized Toro Distributor.
34.To
reduce potential fire hazard, keep the engine area
28.Check
not defeat interlock system. It is for your protection.
performance of all interlock switches daily. Do
free of excessive grease, grass, leaves and accumula-
tion of dirt.
29.To
tion, frequently check and keep all nuts, bolts, screws
and hydraulic fittings tight.
ensure entire machine is in good operating condi-
35.If the engine must be running to perform a mainte-
nance adjustment, keep hands, feet, clothing, and any
other parts of the body away from the cutting units and
any moving parts. Keep everyone away.
30.Make
sure all hydraulic line connectors are tight, and
all hydraulic hoses and lines are in good condition be-
fore applying pressure to the system.
36.Do not overspeed the engine by changing governor
settings. To assure safety and accuracy, have an Autho-
rized Toro Distributor check maximum engine speed
with a tachometer.
31.Keep
body and hands away from pin hole leaks or
nozzles that eject hydraulic fluid under high pressure.
Use paper or cardboard, not hands, to search for leaks.
Hydraulic fluid escaping under pressure can have suffi-
cient force to penetrate skin and do serious damage. lf
fluid is injected into the skin it must be surgically re-
moved within a few hours by a doctor familiar with this
form of injury or gangrene may result.
37.Engine must be shut off before checking oil or adding
oil to the crankcase.
38.To
insure optimum performance and safety, use gen-
uine TORO replacement parts and accessories. Re-
placement parts and accessories made by other
manufacturers could be dangerous, and such use could
void the product warranty of The Toro Company.
32.Before
disconnecting or performing any work on the
hydraulic system, all pressure in system must be re-
lieved by stopping engine and lowering cutting units to
the ground.
Reelmaster 3100−D
Safety
Page 1 − 3
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Reelmaster 3100-D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)