Procedure for Traction Circuit Working Pressure
Test:
2
1.
Make sure hydraulic oil is at normal operating tem-
perature by operating the machine for approximately 10
minutes.
2.
Park machine on a level surface with the cutting units
lowered and off. Make sure engine is off.
3.
4.
tral position (see Adjust Traction Drive for Neutral in the
Adjustments Section).
Read Precautions for Hydraulic Testing.
Make sure that traction pedal is adjusted to the neu-
1
Figure 17
1.
Test port
2.
Floor plate
WARNING
Before disconnecting or performing any work
on the hydraulic system, all pressure in the
system must be relieved. See Relieving Hy-
draulic System Pressure in the General Infor-
mation section.
5.
Connect test gauge with a hydraulic hose attached
to the test port. Make sure hose is long enough so the
operator can read it while driving the machine (Fig. 17).
6.
50
Start engine and move throttle to full speed (2650 +
RPM).
CAUTION
Do not operate sidewinder while performing test.
The test gauge hose may get hit by the sidewind-
er carrier and rupture, and cause personnel inju-
ry.
7.
Drive machine in the forward direction. Observe test
gauge.
A. Pressure while transporting the machine over a
flat, level surface should be about 500 PSI.
B. Pressure driving the machine up a steep hill
should be about 2500 PSI but can reach relief set-
tings (3000 PSI).
C. Pressure while mowing should range between
1000
to 2000 PSI and will vary with terrain.
8.
9.
Release traction pedal and turn off machine.
Disconnect test gauge and hose from the test port
(Fig. 17).
10.If
specification is not met, the hydrostat needs to be
repaired or replaced as necessary.
Reelmaster 3100−D
Hydraulic System (Rev. C)
Page 4 − 31
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Reelmaster 3100-D |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |