Specifications
Figure 1
MOUNTING: All cutting units are supported by equal
length independent lift arms and are interchangeable to
all three cutting unit positions.
CLIP FREQUENCY: With variable speed set to maxi-
mum rpm:
5
5
8
8
blade at 1040 reel rpm moving at 5 mph (8.1 km/h)
inch (25.4 mm) clip.
blade at 1040 reel rpm moving at 6 mph (9.7 km/h)
inch (30.5 mm) clip.
blade at 1040 reel rpm moving at 5 mph (8.1 km/h)
inch (16.0 mm) clip.
blade at 1040 reel rpm moving at 6 mph (9.7 km/h)
inch (19.3 mm) clip.
CONSTRUCTION: 5 or 8 blades of 7 inches (18 cm) di-
ameter welded to stamped steel spiders. Reels are
mounted on greaseable self−aligning ball bearings. A
cutting unit has a reel of either 27 inches (69 cm) in
length or 32 inches (81 cm) in length.
1
1.20
0.63
HEIGHT OF CUT RANGE:
Floating Cutting Unit − 1/4 to 1−3/4 inches
0.76
(6.4mm
to 44.4mm).
Fixed Cutting Unit − 1/2 to 2−5/8 inches
mm to 65.6 mm).
OPTIONAL EQUIPMENT:
Cutting Units
Full Roller Kit
27−inch
(12.7
Model No. 03440
Model No. 03445
Model No. 03450
Model No. 03447
Part No. 60−9560
Part No. 94−5082
Part No. 67−9400
Sectional Roller Kit
Wiehle Roller Kit
Anti−Scalp Roller Kit
Roller Scraper Kit
Wiehle Roller Scraper Kit
Comb Kit
POWER:Reel motors allow easy removal from or instal-
lation onto the cutting unit. Cutting units can be driven
from either end.
HEIGHT−OF−CUT
&
ROLLER
ADJUSTMENT:
Height−of−cut adjustment is made with the rollers by a
quick locating pin and/or threaded micro−adjustment.
32−inch
Cutting Units
Sectional Roller Kit
Wiehle Roller Kit
Full Roller Kit
Anti−Scalp Roller Kit
Roller Scraper Kit
Wiehle Roller Scraper Kit
Both Models of Cutting Units
Fixed Kit
Model No. 03476
Model No. 03475
Model No. 03479
Model No. 03477
Model No. 03478
Part No. 94−5081
BEDKNIFE AND BEDBAR ADJUSTMENT: A single
knob screw adjustment for bedknife to reel is located at
the center of the bedbar.
CUTTING UNIT LIFT: Hydraulic lift has an automatic
reel shut off. All units are controlled from one lever.
Part No. 93−6915
Part No. 94−3664
SUSPENSION SYSTEM: A fully floating suspension
Skid Kit
with hydraulic counterbalance. L−I−N−K−STM cutting
Backlapping Brush Assembly Part No. 29−9100
unit suspension system provides fore and aft oscillation.
Main center pivot allows side−to−side oscillation. With
optional Fixed Kit (Part No. 93−6915), cutting units can
be locked into fixed (fore/aft) position for use with skids
or anti−scalp rollers.
Gauge Bar Assembly
Bedknife Screw Tool
Part No. 13−8199
Part No. 51−0880
Cutting Units
Page 7 − 2
Reelmaster 3100−D
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Reelmaster 3100-D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)