Rear Wheel Removal
Park machine on a level surface, lower cutting units,
stop engine, engage parking brake, and remove key
from the ignition switch.
Rear Wheel Installation
1.
1. If hydraulic fittings were removed, install fittings to
reel motor using marks made during the removal pro-
cess to properly orientate fittings.
2.
Thoroughly clean wheel motor shaft and wheel hub
WARNING
taper.
3.
the wheel motor shaft. Slide motor shaft into hub and se-
cure with lock nut. Torque lock nut from 250 to 350 ft−lb
Clamp wheel hub in a vise. Install woodruff key into
Before jacking up the machine, review and follow
Jacking Instructions in Chapter 1 − Safety.
(339
vise.
to 474 N−m). Remove wheel motor and hub from
2.
Jack up rear of machine enough to allow the removal
of the rear wheel.
4.
Install wheel motor to the rear fork using Figure 43 as
3.
4.
Remove rear tire and rim assembly from machine.
Remove rear wheel motor with wheel hub attached
guide.
5. Install tire and rim assembly to machine.
from the rear fork using Figure 43 as guide.
6.
Lower the machine to the ground.
5.
move lock nut that secures wheel hub to wheel motor.
Secure wheel hub in a vise. Loosen but do not re-
7.
88
Torque rear wheel lug nuts from 45 to 65 ft−lb (61 to
N−m).
IMPORTANT: DO NOT hit wheel hub, wheel hub
puller or wheel motor with a hammer during wheel
hub removal or installation. Hammering may cause
damage to the wheel motor.
8.
essary (see Operator’s Manual).
Make sure hydraulic tank is full. Add correct oil if nec-
6.
Using hub puller (see Special Tools), loosen wheel
hub from wheel motor.
7.
Remove wheel hub and motor from vise. Remove
lock nut and hub from motor shaft. Locate and retrieve
woodruff key.
8.
If hydraulic fittings are to be removed from wheel mo-
tor, mark fitting orientation to allow correct assembly.
Reelmaster 3100−D
Hydraulic System (Rev. C)
Page 4 − 69
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Reelmaster 3100-D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)