Toro 02097SL Rev E Service Manual Groundsmaster 4000 D Service Manual

Reassembly
8.  Install dowel pins in body.
NOTE:  Whenreassemblingthemotor,checktheidenti-
fication marks made during disassembly to make sure
the parts are properly aligned during reassembly.
IMPORTANT: Do  not  dislodge  o--rings,  pressure
seals, or back--up rings during final assembly.
9.
Gently slide the rear cover onto the assembly using
1.
and seal grooves with a thin coat of petroleum jelly. Lu-
Lubricate o--rings,pressureseals,back--upgaskets,
marker or  scribe mark for proper  location. Firm hand
pressure should be sufficient to engage the dowel pins.
bricate all other internal parts freely with clean hydraulic
oil.
10.Position
fullyslidethefrontflangeontotheassembly     usingmark-
er or scribe mark for proper location.
themotorwithrearcover   downwards.Care-
2.
Install new shaft seal  into front flange. Install snap
ring into front flange.
11.
Install the four cap screws and hand tighten.
3.
the front flange and rear cover. Follow by carefully plac-
ing the back--up rings into the grooves.
Install lubricated pressure seals into the grooves in
IMPORTANT: Avoid    using   excessive   clamping
pressureonthemotorhousingtopreventdistorting
the housing.
4.
5.
gear, idler gear and bearing blocks. Carefully assemble
bearing blocks  and gears  noting identification  marks
made during disassembly.
Install new o--rings to the body.
12.Place
torque the screws from 33 to 40 ft--lb (45 to 55 N--m).
motor front  flange in  a vise  and alternately
Lubricate gear faces and bearing surfaces  of drive
13.Put
a small amount of hydraulic oil in port on motor
and rotate driveshaft one revolution. Protect the shaft if
using a pliers. If drive  shaft binds, disassemble motor
and repeat assembly process.
6.
Position the motor body on  its side. Carefully slide
bearing block and gear  assembly into the body cavity
using identification marks made during disassembly.
14.Remove
motor from vise.
7.
faces of body, rear cover, and front flange.  Make sure
that these surfaces are clean and dry.
Remove  any excess  lubrication from  mating  sur-
Hydraulic System (Rev. B)
Page 4 -- 88
Groundsmaster 4000--D
Product Specification
CategoriesLawn Mower Manual, Toro Lawn Mower Manual
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 250 pages
Document TypeService Manual
LanguageEnglish
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website