Toro 02097SL Rev E Service Manual Groundsmaster 4000 D Service Manual

Engine Run Solenoid
The engine run solenoid must be energized for the en-
gine to run. It is mounted on the engine block near the
injection pump.
1
In Place Testing
NOTE:  Prior to taking small resistance readings with a
digital multimeter, short  the meter test leads  together.
The meter will display a small resistance value (usually
0.5
ohms or less). This resistance is due to the internal
3
resistance of the meter and test leads. Subtract this val-
ue from from the measured value of the component you
are testing.
2
1.
Disconnect the connector from the engine run sole-
Figure 24
noid.
1.
2.
Engine run solenoid
Solenoid connector
3.
Injection pump
2.
Using a digital multimeter, touch one lead to the pin
of the black wire and the other lead to the pin of the white
wire. The resistance of the pull coil should be about 0.26
ohms.
2
3
3.
Using a digital multimeter, touch one lead to the pin
of the black wire and the other lead to the pin of the red
wire. The  resistance of the  hold coil  should be about
4
10.9
ohms.
4.
Connect solenoid to the wiring harness.
Live Testing
Disconnect connector from the engine run solenoid.
1
Figure 25
1.
1.
2.
Engine run solenoid
Red wire (hold coil)
3.
4.
White wire (pull coil)
Black wire (common)
NOTE:  The solenoid may be removed from the engine
or tested in place.
2.
If the  solenoid is  removed from the  engine, make
sure that the solenoid linkage moves freely and is free
of dirt, debris, and corrosion.
3.
Connect  a positive  (+)  test  lead from  a  12  VDC
source to the pins of the red and white wires.
4.
Touch  a negative  (−)  test lead  from  the 12  VDC
source to the pin of the black wire. The solenoid should
engage making an audible “click”.
5.
Remove positive (+) voltage from the pin of the white
wire. The solenoid should stay engaged.
6.
Remove positive (+) voltage from the pin of the red
wire. The solenoid should release.
7.
8.
Reinstall solenoid if removed from engine.
Reconnect the harness wire  connector to the sole-
noid.
Groundsmaster 4000−D
Page 5 − 17
Electrical System
Product Specification
CategoriesLawn Mower Manual, Toro Lawn Mower Manual
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 250 pages
Document TypeService Manual
LanguageEnglish
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website