Removal
3
1.
Position machine on a clean, level surface. Lower
cutting units, stop engine, engage parking brake, and
remove key from the ignition switch.
2.
Remove hydraulic motor from cutting deck (see Cut-
ting Deck Motor Removal in the Service and Repairs
Section of Chapter 4 − Hydraulic Systems).
1
1
IMPORTANT: Do not change the length of the damper
link. The length of the damper link should be 5.370” +
2
.075”
ters.
(13.6 cm + .2 cm) measured between rod end cen-
3.
er link to the rear of the cutting deck (Fig. 7).
Remove hairpin and clevis pin that secure the damp-
Figure 6
3.
1.
2.
Flange head screw
Hydraulic motor
Deck mount screw
4.
Remove eight flange head screws, flat washers, and
lock nuts that secure deck mount to cutting deck (Fig. 6).
5.
Raise lift arm enough to separate deck mount from
cutting deck.
6.
Slide the cutting deck away from the traction unit.
Installation
1.
engine, engage parking brake, and remove key from the
ignition switch.
Position machine on a clean, level surface. Stop
1
5.370”
(13.6 cm + .2 cm)
+ .075”
2.
Position the side cutting deck to the lift arm.
3.
Lower lift arm while aligning deck mount to cutting
deck.
2
4.
Install deck mount to cutting deck with eight flange
head screws, flat washers, and lock nuts (Fig. 6). Tight-
en fasteners.
Figure 7
1.
Damper link
2.
Clevis pin
IMPORTANT: Do not change the length of the damper
link. The length of the damper link should be 5.370” +
.075”
ters.
(13.6 cm + .2 cm) measured between rod end cen-
5.
Install clevis pin and hairpin that secure the damper
link to the rear of the cutting deck (Fig. 7).
6.
Install hydraulic motor to cutting deck (see Cutting
Deck Motor Installation in the Service and Repairs Sec-
tion of Chapter 4 − Hydraulic Systems).
7.
Lubricate grease fittings on cutting deck and lift as-
sembly (see Operator’s Manual).
Groundsmaster 4000−D
Page 8 − 9
Cutting Units
Product Specification
Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
---|---|
Tags | Toro Groundsmaster 4000 D |
Download File |
|
Document Type | Service Manual |
Language | English |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |