Removal
Installation
1.
stop engine, engage parking brake, and remove key
from the ignition switch.
Park machine on a level surface, lower cutting units,
1. Position cylinder barrel clevis toframeand insertcyl-
inder pin through the frame and cylinder clevis. Secure
pin with flat washer and lock nut.
2.
Installing Hydraulic System Components at the begin-
ning of the Service and Repairs section of this chapter.
Read the General Precautions for Removing and
2. Insert pin assembly through the lift arm and cylinder
shaft clevis. Secure pin assembly to lift arm with shoul-
der screw and flange locking nut.
NOTE: To ease reassembly, tag the hydraulic hoses to
3. Attach hydraulic hoses to lift cylinder.
show their correct position on the lift cylinder.
4.
Fillreservoir with hydraulic fluid asrequired (seeOp-
3.
4.
secure the pin assembly to the lift arm. Remove pin as-
sembly from lift arm and cylinder shaft clevis.
Disconnect hydraulic hoses from lift cylinder.
erator’s Manual).
Remove shoulder screw and flange locking nut that
5. After assembly is completed, operate lift cylinder to
verify that hydraulic hoses and fittings are not contacted
by anything.
5.
pin. Remove cylinder pin with spring pin from the frame
and cylinder barrel clevis.
Remove lock nut and flat washer from the cylinder
6.
Remove lift cylinder from machine.
Groundsmaster 4000--D
Page 4 -- 99
Hydraulic System (Rev. B)
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro Groundsmaster 4000 D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)