9.
Remove the bevel gear case/axle case assembly
NOTE: Axle bearing shims are available in 0.008 in.
(0.2 mm), 0.012 in. (0.3 mm), and 0.020 in. (0.5 mm)
thickness.
from the axle support. Coat a new O-ring with grease
and temporarily install the axle cover assembly. Position
a dial indicator at the tooths center. Prevent the axle
from turning and measure the lower bevel gear to axle
gear backlash (Fig. 22).
11.
27
Tighten axle cover screws from 17 to 20 ft-lb (23 to
N−m).
12.Coat
a new O-ring with grease and install the bevel
LOWER BEVEL GEAR BACKLASH:
gear case/axle case assembly on the axle support.
Tighten mounting screws and nuts from 35 to 41 ft-lb (47
to 56 N−m) (Fig. 13).
0.004
to 0.016 in. (0.10 to 0.40 mm)
10.Adjust
backlash by increasing or reducing axle bear-
ing shim thickness (see Axle Shafts in this section of this
manual).
Groundsmaster 4000−D
Page 6 − 19
Axles, Planetaries, and Brakes (Rev. B)
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro Groundsmaster 4000 D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)