Removal
Installation
1.
stop engine, engage parking brake, and remove key
from the ignition switch.
Park machine on a level surface, lower cutting units,
1. Position cylinder barrel clevis to frame and insert up-
perliftpinintoframeandclevis.Secureliftpinwithcotter
pin.
2.
Installing Hydraulic System Components at the begin-
ning of the Service and Repairs section of this chapter.
Read the General Precautions for Removing and
2. Insert pin assembly through lift arm and cylinder
shaft clevis. Secure pin to lift arm with cap screw, flat
washers, and lock nut.
NOTE: To ease reassembly, tag the hydraulic hoses to
3. Attach hydraulic hoses to lift cylinder.
show their correct position on the lift cylinder.
4.
Fillreservoir with hydraulic fluid asrequired (seeOp-
3.
4.
secure the pin assembly to the lift arm. Remove pin as-
sembly from lift arm and cylinder shaft clevis which will
free lift cylinder from lift arm.
Disconnect hydraulic hoses from lift cylinder.
erator’s Manual).
Remove lock nut, flat washers, and cap screw that
5. After assembly is completed, operate lift cylinder to
verify that hydraulic hoses and fittings are not contacted
by anything.
5.
lift pin from frame and cylinder barrel clevis.
Remove one cotter pin from upper lift pin. Pull upper
6.
Remove lift cylinder from machine.
Groundsmaster 4000--D
Page 4 -- 101
Hydraulic System (Rev. B)
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro Groundsmaster 4000 D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)