32.Install
L.H. axle shaft assembly:
A. Thoroughly clean mating surface of differential
carrier and side cover (item 1).
1
B. Insertselected shims (item2)intohousing ofside
cover.
NOTE: The thickest shim should be installed
against the bearing.
2
Figure 107
C. Install axle shaft assembly and secure with five
(5)
18.5
flange head screws (item 1). Torque screws from
to 22 ft--lb (24.5 to 29.5 N--m).
1
Figure 108
33.Measure
backlash of ring gear through window on
transaxle case. Using a dial indicator, check ring gear
backlash in three equally spaced points. Backlash
should be 0.0031 to 0.0071 in. (0.08 to 0.18 mm) and
must not vary more than 0.0019 in. (0.05 mm) at the
points checked. If backlash is not in this range, replace
shim set in end of differential carrier:
A. Ifless than target range, decrease total thickness
of shim set until correct backlash is achieved.
B. If exceeds the target range, increase total thick-
ness of shim set until correct backlash is achieved.
NOTE: The thickest shim should be installed
against the bearing.
Figure 109
Workman HD Series
Page 6 -- 51
Drive Train
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 09173SL |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)