Assembly (Fig. 44)
4. Lubricate head and piston with clean Dexron III ATF.
Slide shaft assembly carefully into cylinder barrel.
1.
Make sure all parts are clean before assembly.
IMPORTANT: Prevent damage when clamping the
cylinder’s barrel into a vise; clamp on the clevis
only. Do not close vise on barrel.
2.
back--up ring and dust seal with clean Dexron III ATF.
Coat new O--rings, piston seal, wear ring, shaft seal,
A. Install piston seal, O--rings and wear ring to the
piston.
5.
clamping on the barrel clevis.
Mount liftcylinder inaviseequipped withsoft jawsby
B. InstallO--ring,back--upseal,sealandwipertothe
head.
6.
Secure head in barrel with retaining ring.
A. Align retaining ring hole in the head with the ac-
cess slot in the barrel.
IMPORTANT: When securing shaft in vise, clamp on
shaft clevis only. Do not clamp vise jaws against the
shaft surface.
B. Insert the retaining ring hook into the hole and ro-
tate head clockwise until the retaining ring is com-
pletely pulled into the barrel and the ring ends are
covered.
3.
Mountshaftsecurelyinaviseequippedwithsoftjaws
by clamping on the shaft clevis.
A. Coat shaft with clean Dexron III ATF.
B. Slide head and piston onto the shaft.
C. Apply silicone sealer to tube access slot.
C. Secure piston to shaft with lock nut. Torque lock
nut from 60 to 75 ft--lb (81 to 102 N--m).
Workman HD Series
Page 9 -- 57
Hydraulic System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 09173SL |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)