Removal (Fig. 14)
Park vehicle on a level surface, shut engine off and
Installation (Fig. 14)
1.
1. If front wheel hub is being replaced, install cap screw
(item 22), washers (items 18 and 21) and lock nut (item
remove key from ignition switch.
20)
(231
to new hub. Torque lock nut from 170 to 180 ft--lb
to 244 N--m).
2.
caliper andbrake rotor (seeBrake SystemDisassembly
in this section).
For wheel hub to be serviced, remove wheel, brake
2. If any wheel studs were removed from hub, press
newstud(s)fullyintohubmakingsurethatstudshoulder
is tight against hub.
3.
nut (item 17) that secures splined shaft to wheel hub.
If rear wheel hub is to be removed, remove spindle
3.
cant to splined shaft (item 16).
Ifrearwheel hubwas removed, apply antiseize lubri-
4.
(item 6), remove screws that secure wheel hub to ve-
hicle. Remove wheel hub from vehicle.
Using wheel hub hole to access flange head screws
4. Positionwheelhubtovehicleandsecurewithfour(4)
flange head screws. Torque screws from 35 to 40 ft--lb
5.
age is identified. Use press to extract stud(s) from hub.
Inspect wheel studs in hub and replace studs if dam-
(48
to 55 N--m).
5.
If rear wheel hub was removed, secure wheel hub to
NOTE: If wheel hub wear or damage exists, replace-
ment of the wheel hub assembly is necessary. Wheel
hubs are not rebuildable.
splined shaft with spindle nut (item 17). Torque spindle
nutfrom170to180ft--lb(231to244N--m).Then,stake
spindle nut end into slot in splined shaft.
6.
If front wheel hub replacement is necessary, remove
6.
Brake System Assembly in this section). Make sure that
wheel lug nuts are properly torqued from 80 to 90 ft--lb
(109
Install brake rotor, brake caliper and wheel (see
capscrew(item22),washers (items18and21)andlock
nut (item 20) from wheel hub assembly so that these
components can be installed on replacement hub.
to 122 N--m).
Workman HD Series
Page 7 -- 23
Chassis
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 09173SL |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)