Toro 09173SL Workman HD Series Service Manual

Lift Valve Service
Disassembly (Fig. 35)
1.
After removing lift valve from vehicle, wash valve in
solvent and dry thoroughly.
2.
pads are against jaws of vise. Lift valve spool retaining
ring (item 14) should be facing up.
Carefully mount lift valve in a vise so that mounting
8
9
3.
valvebody.Insidevalvebody,behindeachhexcapplug,
there is a spring (item 3), ball (item 4) and cam pin (item
Remove two (2) hex cap plugs (item 1) from side of
6);
remove these parts.
7
6
NOTE:  Remove check ball seats  (item 5) only if they
need replacement; the seats are press fit into the valve
body.
5
3 4
2
1
4.
Remove retaining ring (item 14) from spool (item 8).
Remove spool retaining ring  (item 13), spring retainer
(item 10), spacer (item 12), spring (item 11) and second
spool retaining ring (item 13). Carefully push and twist
spool to remove spool from valve body.
9
10
11
12
10
13
14
IMPORTANT: When  removing O--rings  from  valve
body, be very careful to not scratch valve bore fin-
ish.
5.
O--rings (item 9) from inside bore of valve body. These
O--rings are the seals for the spool.
Use a hooked scribe or thin screwdriver  to remove
Figure 35
1.
2.
3.
4.
5.
6.
7.
Hex cap plug (2 used)
O--ring (2 used)
8.
9.
10. Spring retainer
11. Spring
12. Spacer
Spool
O--ring
Spring (2 used)
6.
Inspect  all  components  for  wear, paying  special
Check ball (2 used)
Check ball seat (2 used)
Cam pin (2 used)
Valve body
attention to the spool. Signs of wear on one side of the
spool may indicate a  bent spool. Inspect the spool for
flatness and replace if necessary.
13. Spool retaining ring
14. Retaining ring
Assembly (Fig. 35)
1.
Use new O--rings when assembling lift valve.
Clean all components thoroughly before  assembly.
2.
Coat all O--rings and spool with clean Dexron III ATF
before installation  into valve  body. Assemble compo-
nents in reverse order of disassembly. Install spool into
valve body before inserting cam pins, balls, springs and
hex cap plugs.
Hydraulic System
Page 9 -- 44
Workman HD Series
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 306 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website