IMPORTANT: Make sure to not damage the oil seal
on the differential with the pry bars when removing
the CV axle.
LEVERAGE
POINT
6.
Use two small pry bars (180o apart) to leverage the
CV axle out of the differential. Use even pressure on
both pry bars (Fig. 2).
1
7.
Pull CV axle through opening in knuckle and remove
from vehicle.
2
Assembly (Fig. 1)
LEVERAGE
POINT
NOTE: TheinnerendoftheCVaxlehasaretainingring
tokeepaxleengaged indifferential.Theouterendofthe
axle has threads for the spindle nut (item 1).
Figure 2
1.
CV axle.
Apply antiseize lubricant to splines on inner end of
1.
CV axle (LH shown)
2.
Differential assembly
2.
the differential. Press axle into differential until a snap is
heard.
Insert inner end of CV axle through knuckle and into
IMPORTANT: After CV axle installation into differ-
ential, pull outward on CV axle as close as possible
to the differential to make sure that the axle is prop-
erly secured into the differential.
3.
4.
Place wheel spacer (item 10) onto CV axle.
Apply antiseize lubricant to splines on outer end of
CV axle.
5.
flange head screws (item 11) to locate wheel hub to
knuckle. Do not fully tighten screws.
Slide wheel hub onto CVaxle. Loosely install four (4)
6.
spindle nut from 170 to 180 ft--lb (231 to 244 N--m). Af-
Install new spindle nut (item 1) onto CV axle. Torque
ter tightening nut, stake nut extension into slot in axle.
7.
to knuckle. Torque screws from 35 to 40 ft--lb (48 to 55
N--m).
Fullytightenflangeheadscrewstosecurewheelhub
8.
(see Brake System Assembly in the Service and Re-
pairs section of Chapter 7 -- Chassis).
Installbrakerotor,brakecaliper andwheelassembly
WARNING
Failure to maintain proper wheel lug nut torque
could result in failure or loss of wheel and may
result in personal injury. Torque wheel lug nuts
from 80 to 90 ft--lb (109 to 122 N--m).
9.
Make sure that wheel lug nuts are properly tight-
ened.
Workman HDX/HDX--D
Page 10 -- 5
Front Wheel Drive (4WD)
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 09173SL |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)