Clutch Switch
The clutch switch is a normally open proximity switch
that is attached to the frame under the dash (Fig. 13).
The switch is in its normal open position as long as the
clutch pedal is released (clutch engaged). When the
clutchpedalisdepressed(clutchdisengaged),thepedal
is positioned close to the clutch switch causing the
switch to close. The closed clutch switch is used in the
starting interlock system to make sure that the drive sys-
tem is disengaged during engine starting.
1
2
3
Testing
1.
move key from ignition switch and apply parking brake.
Locate the clutch switch (Fig. 13).
Park vehicle on a level surface, shut engine off, re-
2.
Repairs section of Chapter 7 -- Chassis).
Removehood(seeHoodRemovalintheServiceand
Figure 13
3.
1.
2.
Clutch pedal
Clutch switch
Clutch cable
3.
Disconnect the wire harness connector from the
clutch switch.
4.
With the use of a multimeter (ohms setting), test for
continuity across the two (2) switch terminals. There
should be continuity (zero ohms) when the clutch pedal
isdepressedandthereshouldnotbecontinuity(infinite
ohms) when the clutch pedal is released.
5.
harness connector to the clutch switch.
After switch testing is completed, connect the wire
6.
Repairs section of Chapter 7 -- Chassis).
Install hood (see Hood Installation in the Service and
Electrical System
Page 8 -- 12
Workman HD Series
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 09173SL |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)