2.
assembly was removed from vehicle:
If steering linkage (item 19) and center link (item 20)
B. Apply Loctite #271 (or equivalent) to threads of
inner tie rod end. Thread tie rod into center link and
torque from 70 to 80 ft--lb (94 to 109 N--m).
A. Position assembly to frame and secure with re-
moved fasteners. Torque lock nuts (item 33) from 40
to 50 ft--lb (55 to 67 N--m).
C. Clean tapers of knuckle and outer tie rod end ball
joint stud.
B. Secure steering cylinder ball joint to steering link-
age with slotted hex nut. Torque slotted hex nut from
D. Insert outer tie rod end ball joint stud into knuckle
and secure with slotted hex nut. Torque slotted hex
nut from 35 to 40 ft--lb (48 to 55 N--m). If necessary,
tighten nut further until slot in nut aligns with hole in
tie rod ball joint stud. Install cotter pin.
80
to90ft--lb(109to122N--m).Ifnecessary,tighten
nut further until slot in nut aligns with hole in ball joint
stud. Install cotter pin.
C. Install tie rods to center link (see below).
4. Lubricate all grease fittings in steering assembly.
D. Install seat base to vehicle (see Seat Base Instal-
lation in this section).
5. Check front wheel alignment and adjust if necessary
(see Front Wheel Alignment in this section).
3.
To install tie rod (item 11) to vehicle:
A. Iftie rod was separated, make sure thatjam nutis
on inner tie rod threads. Thread outer tie rod end
onto inner tie rod the same number of revolutions as
the old one took to remove.
Chassis
Page 7 -- 26
Workman HD Series
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 09173SL |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)