Toro 98957SL Rev B Sand Pro 2020 3020 5020 Service Manual

Acceleration Valve Removal (Fig. 43)
Charge Check Valve Inspection (Fig. 44)
1.
end cap.
Remove plugs and O–rings from both sides  of the
1.   Inspect ball and spring for nicks, cracks, and distor-
tion. Replace parts as necessary.
2.
of the end cap. Slide other valve out the other side.
Slide acceleration valve and spring out of one side
2.   Inspect  valve seat in the end cap for  damage and
foreign material. Remove any foreign material.
Acceleration Valve Inspection (Fig. 43)
Charge Check Valve Assembly (Fig. 44)
1.
Inspect  valves for  cracks,  bending, and  plugged
1.   Insert ball and spring into the end cap.
holes. Clean out plugged holes; be careful not to dam-
age the valve. Replace valve as necessary.
2.
plugs.
Install  O–rings  and plugs  into  end  cap.  Tighten
2.
Inspect valve bores in the end cap for damage and
foreign material. Remove any foreign material.
4
Acceleration Valve Assembly (Fig. 43)
1.
Insert valve into valve bore. Insert spring and other
valve into other bore.
1
2
2.
cap. Tighten plugs.
Install O–rings and plugs into both sides of the end
3
2
Relief Valve Disassembly (Fig. 44)
Note:
On the  Sand Pro  2020 and  3020 the  control
shaft is on the implement relief valve side of the hydros-
tat. On the  Sand Pro 5020, the control  shaft is on the
charge relief valve side.
3
1
1.
Remove plug and O–ring from variable housing.
Figure 43
IMPORTANT: Do  not   alter  shims  or  interchange
parts between relief valves.
1.
2.
Plug
O–ring
3.
4.
Acceleration valve
Spring
2.
Slide shim kit, spring, and poppet out of the housing.
9
1
3
11
Relief Valve Inspection (Fig. 44)
1.
tortion. Replace parts as necessary.
Inspect poppet and spring for nicks, cracks, and dis-
8
10
2
4
2.
foreign material. Remove any foreign material.
Inspect valve seat in  the housing for damage and
5
2
Relief Valve Assembly (Fig. 44)
1
5
1.
Insert poppet, spring, and shim kit into housing.
7
6
2.
Install  O–rings  and  plugs  into  housing.  Tighten
plugs.
Figure 44
Charge Check Valve Disassembly (Fig. 44)
1.
2.
3.
4.
5.
6.
Plug
7.
8.
Spring (charge)
Plug
O–ring
1.
Remove plug and O–ring from variable housing end
Shim kit (implement)
Spring (implement)
Poppet
9.
10.  Spring (charge check)
11.  Ball (charge check)
O–ring
cap.
Shim kit (charge)
2.
Slide spring and ball out of the end cap.
Sand Pro 2020/3020/5020
Page 4 – 51
Hydraulic System (Rev. A)
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 170 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website