Toro 98957SL Rev B Sand Pro 2020 3020 5020 Service Manual

Fenders (SP 5020)
Left Fender(Seat Base )Removal (Fig. 44)
1
4
1.
Park machine on a level surface, lower attachment,
stop engine,  engage parking  brake, and  remove key
from the ignition switch.
3
2.
Pivot seat up. Separate seat rod from the  base by
removing cotter pin and flat washer.
3.
Separate base  from frame by removing  both lock
nuts, cap screws, flat washers, and spacers.
2
Seat Base Installation (Fig. 44)
Figure 24
1.
frame with both spacers, flat washers, and lock nuts.
Position seat  base to  the frame.  Secure  base to
1.
2.
Cotter pin & flat washer
Seat rod
3.
4.
Lock nut
Cap screw & flat washer
2.
Secure seat rod  to the seat base  with flat washer
and cotter pin. Pivot seat down.
8
7
Right Fender Removal (Fig. 25 and 26)
1.
stop engine,  engage parking  brake, and  remove key
from the ignition switch. Pivot seat up.
Park machine on a level surface, lower attachment,
4
6
2
2.
Disconnect black (negative) cable from the battery.
3
3.
Remove knobs  from  throttle and  choke controls.
1
Remove cap screws and lock nuts securing controls to
the right fender. Pull controls clear of the fender.
5
4.
tion switch to  the right fender.  Pull switch clear of  the
fender.
Remove hex nut and lock washer securing the igni-
Figure 25
1.
2.
3.
4.
Knob
Throttle control
Choke control
5.
6.
7.
Ignition switch
Hex flange head screw
Lift lever
5.
Unscrew knob from the lift lever. Remove both hex
Cap screw & lock nut
8.
Carriage bolt & lock nut
flange head screws from the fender. Remove both car-
riage bolts and lock nuts securing the fender to the rear
panel.
3
6.
Loosen  hose  clamp  and  remove  hose  from  air
cleaner. Remove cap screw, flat washer, lock nut secur-
ing the right fender to the frame. Remove fender.
Right Fender Installation (Fig. 25 and 26)
2
1
1.
Position right fender to the frame. Secure fender to
frame with  hex flange head screws.  Secure fender to
rear panel with both carriage bolts and lock nuts.
2.
and lock nut. Secure hose to cleaner with hose clamp.
Secure fender to frame with cap screw, flat washer,
4
Figure 26
3.
Secureignitionswitchtothefenderwithlockwasher
and hex nut.
1.
2.
Hose clamp
Air cleaner hose
3.
4.
Cap screw/flat washer
Right fender
4.
cap screws and lock nuts. Install knobs to both controls.
Securechokeandthrottlecontrolstothefenderwith
5.
Connect black (negative) cable to the battery.
Wheels, Brakes, and Miscellaneous
Page 6 – 24                                       Sand Pro 2020/3020/5020
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 170 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website