Choke Control Installation
OntheSP2020/3020insertchokecableandcontrol
1
1.
through the dash panel. Secure choke control to the
panel with lock washer and hex nut (Fig. 10).
4
2.
On the SP 5020, secure choke control to the dash
panel or right fender with both cap screws and lock nuts.
Install knob to the choke control lever (Fig. 10).
3
3.
tachcabletoenginewithclamp.Makesurenottotighten
cap screw securing clamp and cable to engine (Fig. 16).
Connect choke cable to the choke pivot lever. At-
2
Figure 16
3.
4.
1.
2.
Carburetor
Choke cable
Clamp
Choke pivot lever
4.
Remove any covering protecting the carburetor in-
let. Install air cleaner base carefully to carburetor. Make
sure not to damage carburetor gasket while instal-
ling base (Fig. 15).
6.
cleaner base. Secure air cleaner cover to air cleaner.
Secure air hose to air cleaner cover. (Fig. 14).
Install air cleaner element and cover plate to the air
NOTE: Newer engine models will have a different car-
buretor shield that has five hex head flange screws se-
curing the shield and air cleaner base to the carburetor.
7.
Positionhoodtothedashpanelandfrontshield.Se-
cure hood to front shield with three hex flange head
screws (Fig. 11). Secure dash panel to hood with four
cap screws (Fig. 12).
5.
Secure air cleaner base and carburetor shield to the
carburetor with two cap screws and three hex head
flange screws (Fig. 15).
8.
Install cover over the engine.
Adjust choke control (see Adjust Choke Control).
Replace Fuel Filter
The fuel filter on the SP 2020/3020 can be accessed
from the rear of the machine. It is located just left of the
hydrostat (Fig. 17).The fuel filter on the SP 5020 can be
accessed by pivoting up the seat up. It is located just for-
ward and right of the engine (Fig. 18).
1
3
An in–line filter is incorporated into the fuel line. Change
filterevery800hours.Usethefollowingprocedurewhen
replacement becomes necessary:
1
2
1.
Close fuel shutoff valve.
Figure 17
3. Fuel filter
1.
2.
Fuel hose
Hose clamp
CAUTION
Since gasoline is highly flammable, drain it out-
doors and make sure engine is cool to prevent a
potential fire hazard. Wipe up any gasoline that
may have spilled. Do not drain gasoline near any
open flame or where gasoline fumes may be ig-
nited by a spark. Do not smoke a cigar, cigarette,
or a pipe when handling gasoline.
1
3
2.
Clamp both fuel hoses connected to the fuel filter so
gasolinecannotdrainwhenhosesareremoved.Loosen
hose clamps. Pull fuel hoses off the filter.
2
2
1
3.
sure arrow on the side of filter points toward the carbure-
tor. Remove clamps that were used to prevent drainage.
Secure new filter to hoses with hose clamps. Make
Figure 18
3.
1.
2.
Fuel hose
Hose clamp
Fuel filter
Engine
Sand Pro 2020/3020/5020
Page 3 – 12
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 3020, Toro 5020, Toro 98957SL.Toro 2020 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)