Toro 98957SL Rev B Sand Pro 2020 3020 5020 Service Manual

Lift Cylinder (SP 2020/3020)
Removal
6
5
1.
Before removing any parts from the hydraulic sys-
6
tem, park the machine  on a level surface, engage  the
parking brake, lower attachment, and stop the engine.
1
6
2
4
7
CAUTION
3
1
Operate all hydraulic controls to relieve system
pressure and avoid injury  from pressurized hy-
draulic oil. Controls  must be operated  with the
ignition switch in OFF. Remove key from the igni-
tion switch.
4
6
2.
3.
Label all hydraulic connections for reassembly.
Disconnect hydraulic hoses  and O–rings from the
8
hydraulic fittings.  Allow hoses  to drain into  a suitable
container.
4.
Put caps or  plugs on disconnected  hoses and fit-
tings to prevent contamination.
5.
Remove cotter pin from the clevis pin. Pull clevis pin
from the hydraulic cylinder and lift arm.
Figure 28
6.
ping.
Support hydraulic cylinder to  prevent it from drop-
1.
2.
3.
4.
Hydraulic hose
5.
6.
7.
8.
Hydraulic cylinder
Cotter pin
Cylinder pin (clevis)
Cylinder pin
90o Hydraulic fitting
45o Hydraulic fitting
A.  Remove a cotter pin from the cylinder pin.
O–ring
B.  Pull cylinder pin from the hydraulic cylinder and
frame.
C. Remove hydraulic cylinder from the frame.
Installation
1.
Position hydraulic cylinder tho the frame. Insert cyl-
inder pin through the frame bracket and cylinder. Secure
pin with cotter pins.
2.
Position clevis  of the  hydraulic cylinder  to the  lift
arm. Insert clevis pin through the cylinder clevis and se-
cure with cotter pins.
3.
Remove caps or plugs from the disconnected hose
and fittings. Connect hydraulic hoses and O–rings to the
hydraulic fittings. Tighten hose connections.
4.
Charge  hydraulic system  (see  Charge Hydraulic
System).
Sand Pro 2020/3020/5020
Page 4 – 39
Hydraulic System (Rev. A)
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 170 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website