Throttle Control Installation
Secure throttle control to the dash panel or right
3
1.
fenderwithbothcapscrewsandlocknuts.Installthrottle
control knob to the throttle control lever (Fig. 10).
2.
Connect throttle cable to the swivel on the engine.
Attach cable to engine with clamp. Make sure not to
tighten cap screw securing clamp and cable to engine
(Fig. 13).
2
3.
On the SP 2020/3020, position hood to the dash
panel and front shield. Secure hood to front shield with
three hex flange head screws (Fig. 11). Secure dash
panel to hood with four cap screws (Fig. 12).
1
4
4.
Adjust throttle control (see Adjust Throttle Control).
Install cover over the engine.
Figure 13
1.
2.
Throttle cable
Clamp
3.
4.
Swivel
Air cleaner
Choke Control Removal
1.
Park machine on a level surface, lower attachment,
stop engine, engage parking brake, and remove key
from the ignition switch.
3
4
1
2
2.
Pivotseat up. On theSP2020/3020,removetheen-
5
gine shield.
6
7
3.
OntheSP2020/3020removethreehexflangehead
screws securing the hood to the front shield (Fig. 11).
Remove four cap screws securing the dash panel to the
hood (Fig. 12). Remove hood from the machine.
8
4.
Remove air hose from air cleaner cover. Remove air
cleaner cover. Remove cover plate and air cleaner ele-
ment from the air cleaner base (Fig. 14).
Figure 14
1.
2.
3.
4.
Hose clamp
Air hose
Air cleaner cover
Air cleaner knob
5.
6.
7.
8.
Air cleaner knob
Cover plate
Air cleaner element
Air cleaner base
NOTE: Newer engine models will have a different car-
buretor shield that has five hex head flange screws se-
curing the shield and air cleaner base to the carburetor.
5.
Remove two cap screws and three hex head flange
3
5
screws securing air cleaner base to the carburetor. Re-
move base carefully from carburetor. Make sure not to
damage carburetor gasket. Cover carburetor to prevent
dirt and debris from entering (Fig. 15).
2
3
1
4
6.
Release choke cable from clamp securing it to the
engine. Disconnect choke cable from the choke pivot le-
ver on the engine (Fig. 16).
3
7.
On the SP 2020/3020 remove hex nut and lock
washer securing the choke control to the dash panel.
Pull choke control and cable from dash panel (Fig. 10).
Figure 15
8.
On the SP 5020, remove choke knob from the
1.
2.
3.
Cap screw
Carburetor shield
4.
5.
Air cleaner base
Carburetor shield (newer
choke control. Remove both lock nuts and cap screws
securing the choke control to the right fender. Remove
choke control from the machine (Fig. 10).
Hex head flange screw
models)
Sand Pro 2020/3020/5020
Page 3 – 11
Engine
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro 3020, Toro 5020, Toro 98957SL.Toro 2020 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)