Toro 98957SL Rev B Sand Pro 2020 3020 5020 Service Manual

3.
hub to the engine shaft (Fig. 46).
Tighten both set screws on the engine hub to secure
6.   Install seat base with seat attached to the frame as
follows (Fig. 44):
4.
choke control cable to the choke lever (see Throttle and
Choke Control Installation).
Connect  throttle control  cable  to  the swivel  and
A.  Positionbase on machine. Secure base to frame
with both  spacers, cap screws,  flat washers,  and
lock nuts.
5.
   Connect wire harness as follows (Fig. 45):
B. Secure seat rod to the base with flat washer and
cotter pin.
A.  Connect blue wire to the magneto terminal.
7.
tery Service in Chapter 5 – Electrical Systems).
Install and connect battery to the machine (see Bat-
B.  Connect blue wire with fusible link to voltage reg-
ulator.
8.
Remove clamp from fuel hose that was used to prevent
fuel spillage. Open fuel shutoff valve.
Secure fuel hose to the fuel pump with hose clamp.
C. Connect red/white wire to fuel solenoid.
Sand Pro 2020/3020/5020
Page 3 – 29
Engine
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 170 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website