Change Hydraulic System Fluid and Filter
The hydraulic system filter must be changed initially af-
ter the first 8 hours of operation. Thereafter, it must be
changed every 400 hours of operation or yearly, which-
ever comes first. Use a genuine Toro oil filter for replace-
ment. The hydraulic oil must be changed every 400
hours of operation or yearly, whichever comes first.
2
1.
Park machine on a level surface and turn the engine
off.
1
2.
On the SP 2020/3020, pivot seat up. On the SP
5020, remove three cap screws securing the right side
panel to the machine and remove panel.
Figure 22
3.
On theSP 2020/3020, disconnect tube from the bot-
1.
Tank (SP 5020)
2.
Drain plug
tom fitting of the hydraulic tank. Let oil flow into a drain
pan. Reinstall and tighten tube connection when oil
stops draining.
4.
On the SP 5020, place a funnel under the tank drain
plug to direct oil into a drain pan. Remove drain plug and
allow oil to drain into pan. Reinstall and tighten drain
plug when the oil stops draining (Fig. 22).
5.
filter from the filter head. Allow oil to flow into a drain pan.
Dispose of the oil filter properly (Fig 23 or 24).
Clean area around the hydraulic oil filter. Remove
2
1
6.
Apply a film of clean hydraulic oil on the filter gasket.
Install filter by hand until gasket contacts filter head, then
tighten filter an additional three–fourths of a turn.
7.
Fill tank to the proper level (see Check Hydraulic
System Fluid).
Figure 23
8.
neutral position. Start engine. Run engine at lowest
Make sure traction pedal and lift lever are in the
1.
Filter (SP 2020/3020)
2.
Filter head
possible RPM to purge the system of air.
9.
Run engine until the lift cylinder can be extended
and retracted and wheel motion in the forward and re-
verse direction is achieved.
10.
if necessary.
Stop engine and check oil level in the tank. Add oil
2
1
11.
12.
Check all hydraulic connections for leaks.
On the SP 2020/3020, pivot seat down. On the SP
, install right side panel and secure with three cap
5020
screws.
Figure 24
13.
Dispose of oil properly.
1.
Filter (SP 5020)
2.
Filter head
Sand Pro 2020/3020/5020
Page 4 – 33
Hydraulic System (Rev. A)
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro 3020, Toro 5020, Toro 98957SL.Toro 2020 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)