Toro 10178SL Service Manual Groundsmaster 4300 D Preface Publication

5.
Putcaps or plugs on disconnected hoses andfittings
to prevent contamination.
#4
#1
#5
6.
Remove two (2) socket head screws and flat wash-
ers that secure hydraulic motor to the cutting deck (Fig.
Remove hydraulic motor and O--ring from deck.
84).
7.
spindle. A spindle plug (see Special Tools in this chap-
ter) can be used to cover spindle.
Cover top of spindle to prevent debris from entering
GROUNDSMASTER
4300--D CUTTING
DECK LOCATIONS
#2
#3
8.
If hydraulic  fittings are to be  removed from motor,
mark fitting orientation  to allow correct assembly. Re-
move fittings from motor and discard O--rings.
Installation (Fig. 82)
FRONT
1.
If hydraulic fittings were removed from motor, lubri-
cate new O--rings, position O--rings to fittings and install
fittingsintomotorports(seeHydraulicFittingInstallation
intheGeneralInformationsectionofthischapter).Make
sure that fittings are orientated correctly.
Figure 83
2
1
3
2.
Remove cover from top of spindle that was placed to
prevent debris from entering spindle.
3.
housing. Secure hydraulic motor tothecutting deck with
two (2) socket head screws and flat washers (Fig. 84).
Make sure that O--ring is positioned to top of spindle
4
4.
Remove caps or plugs from fittings and hoses.
IMPORTANT: When  installing   the  hydraulic  hoses,
makesurethathydraulic  hosesarestraight  (nottwisted)
before tightening the hoses to the motor fittings.
5.
Lubricate and install new O--rings on motor fittings.
Correctly connect hydraulic hoses to the motor using la-
bels placed during  removal procedure (see  Hydraulic
Hose and Tube Installation in the General Information
section of this chapter).
Figure 84
1.
2.
Socket head screw
Flat washer
3.
4.
Hydraulic motor
Cutting deck
6.
Check oil level in hydraulic reservoir and add correct
oil if necessary.
ROTATION
DIRECTION
7.
Hydraulic System Start--up in this section).
Follow Hydraulic System Start--up procedures (see
1
2
3
Figure 85
1.
2.
Flow IN
Flow OUT
3.
Case drain
Groundsmaster 4300--D
Page 4 -- 95
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 255 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website