Toro 10178SL Service Manual Groundsmaster 4300 D Preface Publication

Mow/Transport Switch
Themow/transport switchisanormally  closedproximity
switch that opens when the mow speed limiter is placed
in the transport position. The switch mounts to a bracket
on the footrest platform. The sensing plate for the mow/
transport switch  is the  mow speed limiter.  The mow/
transport  switch  is  used  as  an  input  for   the  TEC
controller.
4.  If the mow/transport switch tests correctly and a cir-
cuit problem still exists, check wire harness (see Electri-
cal  Schematic and  Circuit  Drawings in  Chapter  8 --
Foldout Drawings).
5.
Makesurethatmow/transport  switchisconnected  to
wire harness when testing is complete.
Testing
1.
Before disconnecting the  mow/transport switch for
testing, the switch and its circuit wiring should be tested
as a TEC  controller input with the  Diagnostic Display
(see Diagnostic Display in the Troubleshooting section
ofthischapter).IftheDiagnostic   Displayverifies  thatthe
mow/transport switch and circuit wiring are functioning
correctly, no further switch testing is necessary. If, how-
ever, the Diagnostic Display determines that the mow/
transport switch and  circuit wiring are not functioning
correctly, proceed with testing procedure.
2
1
3
2.
Turn ignition switch to the ON position (do not start
engine) and check LED on cable end of mow/transport
switch (Fig. 33). LED should be illuminated  when the
mow speed  limiter is in  the MOW  position. The LED
should not  be illuminated  when the  limiter is  in the
TRANSPORT position.
Figure 33
1.
2.
Mow speed limiter
3.
Switch cable
Mow/transport switch
3.
If the mow/transport switch LED did not function cor-
rectly:
A.  Make sure that the mow/transport switch is prop-
erly adjusted (see Mow/Transport Switch in the Ad-
justments  section  of  this  chapter).  If  necessary,
adjust switch and return to step 2 above.
B.  Make sure ignition switch is OFF and disconnect
the mow/transport switch  connector from machine
wire harness.
C. Verify  that the machine wire harness connector
terminal  for  black  wire  is  closed   (continuity)  to
ground.
D. Turn  ignition switch to  the ON position  (do not
start engine) and  verify with a multimeter that  ma-
chine wire harness connector terminal for pink wire
has system voltage (12 VDC) present.
E.  If black wire is  closed to ground, pink  wire has
system voltage present and switch LED did not func-
tion, replace mow/transport switch. Adjust switch af-
ter  installation (see  Mow/Transport  Switch in  the
Adjustments section of this chapter).
Groundsmaster 4300--D
Page 5 -- 31
Electrical System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 255 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website