Headlight Switch
The headlight switch is located on the operator side of
thecontrol arm. Thisrocker switch allows theheadlights
to be turned on and off.
Testing
1.
headlight switch (see Control Arm Disassembly in the
Service and Repairs section of Chapter 6 -- Chassis).
Remove inside control arm cover to gain access to
2.
Make sure ignition switch is in the OFF position. Dis-
1
connect wire harness electrical connector from the
headlight switch.
3.
With the use of a multimeter (ohms setting), the
switch functions may be tested to determine whether
continuity exists between the various terminals for each
position. The switch terminals are marked as shown in
Figure 26. The circuitry of the headlight switch is shown
in the chart below. Verify continuity between switch ter-
minals.
Figure 25
1.
Headlight switch
SWITCH
POSITION
NORMAL
CIRCUITS
OTHER
CIRCUITS
ON
2 + 3
2 + 1
5 + 6
5 + 4
OFF
BACK OF SWITCH
4.
Replace headlight switch if necessary. Connect wire
harness electrical connector to the headlight switch.
Figure 26
5.
Install control arm cover to machine (see Control
Arm Assembly in the Service and Repairs section of
Chapter 6 -- Chassis).
NOTE: Headlight switch terminals 3, 4, 5 and 6 are not
used on Groundsmaster 4300--D machines.
Electrical System
Page 5 -- 26
Groundsmaster 4300--D
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 4300 D |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |