5.
cess to steering column fasteners (Fig. 4).
Remove platform shroud from machine to allow ac-
9. Install steering wheel cover to steering wheel.
3
A. Remove cover plate from platform.
1
2
B. Remove fasteners that secure shroud to ma-
chine.
4
C. Remove shroud from machine.
D. Locate and retrieve two (2) rubber bushings and
spacers.
5
3
6.
cess to fasteners that secure steering column to ma-
chine.
Slide rubber bellows up steering column to allow ac-
6
7
8
7.
ling during steering column removal.
Support steering control valve to prevent it from fal-
8.
(item 6) that secure steering control valve to steering
column.
Loosen and remove four (4) socket head screws
9.
(item 17) and flange nuts (item 7) that secure steering
column to machine.
Loosen and remove four (4) socket head screws
Figure 4
1.
2.
3.
4.
Washer (2 used)
Screw (2 used)
Washer head screw
Platform shroud
5.
6.
7.
8.
Lock nut (2 used)
Cover plate
Bushing (2 used)
Spacer (2 used)
10.Slide
steering column assembly from steering con-
trol valve and machine.
11.
Disassemble steering column assembly as needed
using Figure 5 as a guide.
1
Installation (Fig. 3)
1.
Apply antiseize lubricant to input shaft of steering
control valve.
4
2.
Secure steering column in place with four (4) socket
head screws (item 17) and flange nuts (item 7).
Slide steering column onto steering control valve.
5
6
3.
four (4) socket head screws (item 6).
Securesteeringcontrolvalvetosteeringcolumnwith
7
8
2
3
4.
5.
Slide rubber bellows to bottom of steering column.
Place rubber bushings and spacers into holes of
9
12
10
11
platform shroud (Fig. 4). Position shroud in place and
secure with removed fasteners.
Figure 5
1.
2.
3.
4.
5.
6.
Steering column
Pin
Universal joint
Pin
7.
8.
9.
Bolt (2 used)
Pin
6.
Thoroughlycleantaperedsurfacesofsteeringwheel
Pedal block
and steering column.
10. Pedal cover
11. Pedal
12. Spring
Lock washer (2 used)
Cylinder
7.
Apply antiseize lubricant to splines of steering col-
umn taking care tokeep antiseize lubricant from column
taper. Slide steering wheel onto steering column.
8.
Secure steering wheel to steering column with flat
washer and lock nut. Torque lock nut from 20 to 26 ft--lb
to 35 N--m).
(28
Groundsmaster 4300--D
Page 6 -- 7
Chassis
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 4300 D |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)