Toro 10178SL Service Manual Groundsmaster 4300 D Preface Publication

Steering Circuit
A four section gear pump is coupled to the piston (trac-
tion) pump. Gear  pump section P3 supplies hydraulic
flow to  the steering control  valve and for  the traction
charge circuit. The gear pump takes its suction from the
hydraulic reservoir.Steeringcircuitpressureislimitedto
Right Turn (Fig. 20)
When a right turn is made with the engine running, the
turning of the steering wheel positions the steering con-
trol spool valve so that flow is directed through the top
of the spool. Flow entering the steering control valve at
the P port goes through the spool and is routed to two
places. As in  a left turn, most  of the flow through  the
valveisbypassedouttheTportbacktothetransmission
oil filter and traction charge circuit. Also like a left turn,
the remainder of the flow is directed through rotary me-
ter (V1) butgoes outport R. Pressure extends the steer-
ing cylinder  piston  for a  right turn.  The rotary  meter
ensures that the oil flow to the steering cylinder is pro-
portional to the  amount of the turning  on the steering
wheel. Fluid  leaving the  steering cylinder  flows back
through the steering  control spool valve then  through
the T port and to the hydraulic reservoir.
1000
PSI (70 bar) by a relief valve (R10) located in the
steering control valve.
With the steering wheel in the neutral position and the
engine running, hydraulic flow enters the steering con-
trol valve at the  P port and goes through  the steering
control spoolvalve,bypassing the rotary meter (V1)and
steering cylinder. Flow leaves the control valve through
theTporttothetransmissionoilfilterandtractioncharge
circuit.
Left Turn (Fig. 20)
When a left turn is  made with the engine running, the
turning of the steering wheel positions the steering con-
trol spool valve so that flow is directed through the bot-
tomofthespool.Flowenteringthesteeringcontrolvalve
at the P port goes through the spool and is routed to two
places. First, most of the flow through  the valve is by-
passed out the T port back to the transmission oil filter
andtractionchargecircuit.Second,theremainder    ofthe
flowisdirected  throughtherotarymeter(V1)andoutthe
L port. Pressure contracts the  steering cylinder piston
for a left turn. The rotary meter ensures that the oil flow
to the steering cylinder is proportional to the amount of
turning on the steering wheel. Fluid leaving the steering
cylinder flows back through  the steering control spool
valve and then out of the steering control valve through
the T port.
The steering control valve returns to the neutral position
when turning is completed.
The steering control valve returns to the neutral position
when turning is completed.
Groundsmaster 4300--D
Page 4 -- 21
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 255 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website