Removal (Fig. 2)
Park machine on a level surface, lower cutting
Installation (Fig. 2)
1.
1. Install wheel and secure with five (5) lug nuts.
decks, stop engine, engage parking brake and remove
key from the ignition switch.
2.
3.
Lower machine to ground.
Torque lug nuts evenly in a crossing pattern from 70
2.
3.
Chock wheels to prevent machine from shifting.
Loosen wheel lug nuts.
to 90 ft--lb (95 to 122 N--m).
CAUTION
When changing attachments, tires or perform-
ing other service, use correct supports, hoists
and jacks. Make sure machine is parked on a
solid, level surface such as a concrete floor.
Prior to raising machine, remove any attach-
ments that may interfere with the safe and
properraisingofthemachine.Alwayschockor
block wheels. Use jack stands or other ap-
propriate load holding devices to support the
raised machine. If the machine is not properly
supported, the machine may move or fall,
which may result in personal injury.
4.
(see Jacking Instructions in Chapter 1 -- Safety). Sup-
port machine with jack stands.
Using a jack, raise machine so wheel is off ground
5.
Remove lug nuts and then remove wheel from ma-
chine.
Groundsmaster 4300--D
Page 6 -- 5
Chassis
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 4300 D |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |