IMPORTANT: When removing the seat suspension,
make sure to support the control arm to prevent
damage to the throttle cable, control arm electrical
components and control arm wiring harness.
1
4
13
FRONT
12
Removal (Figs. 18 and 19)
11
1
8
1.
Park machine on a level surface, lower cutting
decks, stop engine, engage parking brake and remove
key from the ignition switch.
2
5
3
9
7
2.
Battery Service in the Service and Repairs section of
Chapter 5 -- Electrical System).
Disconnect negative battery cable from battery (see
10
3.
Remove seat from machine (see Operator Seat Re-
moval in this section).
6
IMPORTANT: Take care to not damage the throttle
cableorelectricalharnesswhenremovingseatsus-
pension from machine.
5
4
4.
Tilt and support seat frame to allow access to seat
suspension fasteners.
Figure 19
5.
Support seat suspension to prevent it from falling.
Remove four (4) flange head screws (Figure 19 item 8)
and flange nuts (Figure 19 item 5) that secure seat sus-
pension to seat frame.
1.
2.
3.
4.
5.
6.
7.
Seat suspension
8.
Flange screw (4 used)
Cap (4 used)
Seat bracket (2 used)
Screw (4 used)
Seat frame
9.
10. Manual tube
11. R--clamp (2 used)
12. Flat washer (4 used)
13. Seat adjuster
Flange nut (8 used)
Seatbase cover
Spacer (4 used)
6.
Remove seat suspension from machine. Locate and
retrieve four (4) spacers (Figure 19 item 7) from be-
tween seat suspension and seat frame.
14. Seat adjuster w/latch
7.
Remove seat suspension components as needed
using Figures 18 and 19 as guides.
Installation (Figs. 18 and 19)
1.
Install all removed seat suspension components us-
ing Figures 18 and 19 as guides.
IMPORTANT: Take care to not damage the throttle
cable orelectrical harness when installing seat sus-
pension to machine.
2.
19
Positionseatbasecoverandfour(4)spacers (Figure
item 7) to seat frame.
3.
Position seat suspension to seat frame and secure
with four (4) flange head screws (Figure 19 item 8) and
flange nuts (Figure 19 item 5). Use forward holes in seat
brackets to mount suspension.
4.
tion in this section). Make sure to connect harness elec-
trical connector to the seat switch.
Install seat to machine (see Operator Seat Installa-
5.
tery Service intheService and Repairs section ofChap-
ter 5 -- Electrical System).
Connect negative battery cable to battery (see Bat-
Groundsmaster 4300--D
Page 6 -- 21
Chassis
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 4300 D |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)